About
Key Features
High strength repairable alloy cutters
2 x 37kW motors
Planetary gearboxes
Rated lifting points (4)
Cutter tensioning system
Galvanised removable legs for easy maintenance
- Made in Australia
- 74kW (2 x 37kW) drives
- High torque/low speed
- 160mm hexagonal shafts for superior strength
- Planetary reduction gearbox
- 30/45/60 mm high surface hardness/high core strength repairable alloy cutters
- up to 50 t/hr throughput
- Hot dip galvanised cutting chamber
- Seal protection plates and high pressure bearing seals
- DOL or VSD control options available with auto reverse and overload protection.
Specifications
| XTR74M | |
| Tons/hr(kill floor/boning room materials) | Up to 50 |
| Cutter Width (mm) | 30/45/60 |
| Output size (mm) | 30/45/60 x 60-120 (with some longer pieces) |
| Motor | 74kw (2 x 37kw) |
| 3 Phase Voltage | 415V/50Hz |
| Full load current (amps) | 134 |
| DOL starting current (amps) | 1072 |
| Shaft centres (mm) | 320 |
| Shaft diameter (mm) | 160 |
| Length over cutters (mm) | 1470 |
| Cutting Chamber Width (mm) | 825 |
| Number of shafts | 2 |
| Machine length (mm) | 3563 |
| Width (mm) | 1710 |
| Height (mm) | 554 |
| Weight (kgs) | 5000 |
