A 60kw pre-breaker for up to 35T/hr of boning room material.
Suitable for high throughput facilities or where full carcass pre-breaking is required.
Key Features
- Made in Australia
- 60kW (2 x 30kW drives)
- High torque/low speed
- 105mm hexagonal shaft for superior strength
- Planetary reduction gearbox
- High surface hardness/high core strength repairable alloy cutters
- 20 or 31mm cutters
- up to 35T/hr throughput
- Hot dip galvanised casing
- Seal protection plates and high pressure bearing seals
- DOL or VSD control options available with auto reverse and overload protection.
Specifications
| Tons/hr(kill floor/boning room materials) | 27-35 |
| Cutter Width (mm) | 31/47/70/94 |
| Output size (mm) | 31/47/70/94 x 75 |
| Motor | 60kw (2 x 30kW) |
| 3 Phase Voltage | 415V/50Hz |
| Full load current (amps) | 106 |
| DOL starting current (amps) | 848 |
| Shaft centres (mm) | 250 |
| Shaft diameter (mm) | 105 |
| Length over cutters (mm) | 1300 |
| Cutting Chamber Width (mm) | 650 |
| Number of shafts | 2 |
| Cutter Width (mm) | 31/47/70/94 |
| Machine length (mm) | 3600 |
| Width (mm) | 1200 |
| Height (mm) | 603 |
| Weight (kgs) | 5000 |
