A 37kw gut cutter for up to 8T/hr of soft offal
Developed for applications where high volume gut cutting is required – a perfect companion for our AZ80/60M Pre-Breaker. Using the same robust frame as the AZ50HDM Pre-breaker and with a 1382mm long cutting chamber as standard, this machine is capable of processing up to 8T/hr of soft offal material.
Key Features
- Made in Australia
- 37kW (2 x 18.5kW drives)
- High torque/low speed
- 120mm hexagonal shaft for superior strength
- Planetary reduction gearbox
- High surface hardness/high core strength repairable alloy cutters
- 38mm cutters
- up to 8 t/hr throughput
- Hot dip galvanised casing
- Seal protection plates and high pressure bearing seals
- DOL or VSD control options available with auto reverse and overload protection.
Specifications
| AZ50HDG | |
| Tons/hr(soft offal) | 7-8 |
| Cutter Width (mm) | 38 |
| Output size (mm) | 38 x 75 |
| Motor | 2 x 18.5Kw |
| 3 Phase Voltage | 415V/50Hz |
| Full load current (amps) | 66 |
| DOL starting current (amps) | 536 |
| Shaft centres (mm) | 229 |
| Shaft diameter (mm) | 120 |
| Length over cutters (mm) | 1382 |
| Cutting Chamber Width (mm) | 599 |
| Number of shafts | 1 |
| Machine length (mm) | 3208 |
| Width (mm) | 1008 |
| Height (mm) | 465 |
| Weight (kgs) | 2300 |
