A 15kw gut cutter for up to 6T/hr of soft offal
Brentwood’s AZ15WLG range of Gut Cutters are available in 3 standard sizes to enable you to match the Gut Cutter throughput to your production rate. By producing consistently sized pieces, optimised for rendering, cooking times and fat losses can be reduced.
Key Features
- 1 x 15kW drive or 1 x 18.5kW drive (AZ15WLG-1200)
- High torque/low speed
- 60mm hexagonal shaft for superior strength
- Planetary reduction gearbox
- High surface hardness/high core strength repairable alloy cutters
- Made in Australia
- 38mm cutters
- 3 standard cutting chamber lengths
- up to 6 t/hr throughput
- Hot dip galvanised casing
- Seal protection plates and high pressure bearing seals
- DOL or VSD control options available with auto reverse and overload protection.
Specifications
| AZ15WLG-700 | AZ15WLG-1000 | AZ15WLG-1200 | |
| Tons/hr(soft offal) | 3-4 | 4-5 | 5-6 |
| Cutter Width (mm) | 38 | 38 | 38 |
| Output size (mm) | 38 x 75 | 38 x 75 | 38 x 75 |
| Motor | 1 x 15kW | 1 x 15kW | 1 x 18.5kW |
| 3 Phase Voltage | 415V/50Hz | 415V/50Hz | 415V/50Hz |
| Full load current (amps) | 27 | 27 | 27 |
| DOL starting current (amps) | 216 | 216 | 216 |
| Shaft centres (mm) | 180 | 180 | 180 |
| Shaft diameter (mm) | 60 | 60 | 60 |
| Length over cutters (mm) | 573 | 840 | 1108 |
| Cutting Chamber Width (mm) | 490 | 490 | 490 |
| Number of shafts | 2 | 2 | 2 |
| Machine length (mm) | 2228 | 2528 | 2762 |
| Width (mm) | 900 | 900 | 900 |
| Height (mm) | 398 | 398 | 398 |
| Weight (kgs) | 1000 | 1100 | 1300 |
